Professional Underground Metal Detector TX-850 with 12inch Bigger Coil high performance Scanner Finder Gold Digger Treasure Hunter Detecting Equipment Wire Detector

If you do not have prior experience with a metal detector,we strongly recommend that you:

1): Adjust the Gain to a low setting in the event of false signals.

2): Do not use indoors.This detector is for outdoor use only.Many household appliances emit electromagnetic energy, which can interfere with the detector. If conducting an indoor demonstration, turn the Gain down and keep thesearchcoilawayfromappliances such as computers, televisions and microwave ovens. If your detector beeps erratically, turn off appliances and lights.

Also keep the search coil away from objectsco ntainingmetal,suchasfloors and walls.

3): Usea9-volt ALKALINE battery only. Do not use Heavy Duty Batteries.（no battery included in the packing box）

Introduction to the TX-850 DEEP PENETRATING GOLD NUGGET HUNTER

The New TX-850 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an allpurpose treasure detector.

The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold,and aunique discrimination control system. These features also make foragreatrelic-hunting detector. WhiletheTX-850 makes fora highly competentcoin-shootingdetector,its user interface and features are not specifically designed for this purpose. As a coin-shooter,you will notice that the TX-850 exhibits slightly lower sensitivity to high-conductivity coins,likeaU.S. quarter; this is a resul to fits specialized design to empha-size sensitivity to small, low conductivity metals like gold nuggets.

Device Specifications

Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position armrest

Weight: 2 lbs, 8 oz with battery installed

Standard searchcoil: 11 inch searchcoil

Batteries: Single 9 volt rectangular alkaline

Operating principle: VLF induction balance

Operating frequency: 19 kHz, crystal controlled

Reactive overload: 10,000 micro-cgs (with standard searchcoil)

Resistive overload: 1,200 micro-cgs (with standard searchcoil)

Ground balance range: From ferrite to salt water inclusive

Discrimination ground suppression: Combination of 2 nd and 3 rd order methods

Target-ID ground suppression: 3 rd order

Battery life: 15+ hours on good quality alkaline

Operating temp range: 14 to 122 degrees F (-10 to +50 C)

Operating humidity range: 0 – 90% noncondensing

SEARCH TECHNIQUES

Target Verification

After detecting a target, do the following:

1. Walk around the target in acircle.

2.While circling the target, conttinue sweeping the search coil across the target.

3.Sweep once every 30° or 40° of the circle.

If the tone does not change and the Target-ID value is consistent as you circle the target, you can be highly confident of the target’s identification.

If the tone or Target-ID changes as you circle the target,you may have multiple targets or an irregularly shaped object.

If the tone completely disappears at different angles, the target may be trash or a low- valuemetal.

If you are new to the hobby, dig all targets. With practice in the field, you will soon be able to correlate audible and visual target  feedback with certain types of metal objects.

Pinpointing in Discrimination Mode:

1. Sweep over target in narrowing side-to-side pattern.

2. Takevisual note of spot on ground where “beep” occurs.

3. Step 90° to the side of the target.

4. Sweep searchcoil over same area, at 90° to 1st sweep pattern.

5. This pinpoints the target location with an “X.”

TARGET PINPOINTING

After you have identified a target using Discrimination Mode,press-and-hold the PINPOINT button to identify the target’s exact location. This technique can yield more information about the target’s shape and size and also find its exact location to facilitate extraction.

Pinpoint as follows:

1. Position the searchcoil just barely off the ground, and to the sideof the target.

2. Now move the searchcoil slowly across the target; you can locate it by the sound. The target is located directly under where the sound is loudest.

Narrow It Down:

1. Tonarrow the response further, position the center of the searchcoil

near the center of the response pattern, but not directly over the

center.

2. Release the PINPOINT button.

3. Press-and-hold PINPOINT button again.

4. Repeat this narrowing procedure to narrow the field of detection further.

Note: Depth indication is less accurate after narrowing.

Suggestions before use

If the wrong signal is displayed during the probe,adjust the sensitivity to a lower positionand start using at a lower sensitivity level.

Do not use it indoors.Metal detectors are suitable for outdoor use because electromagnetic signals from many household appliances can interfere with the detector. If you are doing an indoor demonstration, you need to first reduce the sensitivity, and the detection disk should be away from household appliances such as computers, televisions, air conditioners, and microwave ovens. If your detector makes an unusual beep, turn off the
appliance. Keep away from objects that contain metal, such as concrete floors and walls.

Please use 19-volt alkaline battery(6F22)If you want to use a rechargeable battery, we recommend using anickel-metal hydride rechargeable battery.(because the battery cannot be transported, please buy it locally)

Product Advantages:

⭐With backlight, it can be used at night.

⭐The interface design is simple and easy to understand. Anyone can easily navigate.

⭐High sensitivity and faster detection of targets.

⭐Thecoil is waterproof and moisture resistant. Can be detected in the water. (The control unit is not waterproof, pay attention to protection)

Product information

⭐working frequency:8.19kz

⭐Sound adjustment:the sound size can be adjusted through the headphones

⭐Detection depth:The standard is 25 cents (the detection depth is 25-35 cm). The larger the area of the object is detected, the deeper the depth. The deepest depth of detection currently: 1.5 meters (based on 50 × 50 × 1.2 cm aluminum plate)

⭐Battery:9 volt alkaline battery(not included in the package)

⭐Search coil:13 inches, waterproof, interchangeable

⭐Operating temperature:( – 10 to +50) degrees Celsius

⭐Operating humidity range:0 to 90% non-condensing

Package Included :

1 X control unit

1 X Upper stem

1 X 12 inch Search Coil & Stem

1 X Wing nut & Threaded bolt

2 X Mounting washers

1 X English manual

1 X backpack(optional)

1 X headphone(optional)