Integrated Circuit IC Chip Tester Transistor Optocoupler Operational Amplifier Regulator Tube Automatic Identification Device

Integrated Circuit IC Chip Tester Transistor Optocoupler Operational Amplifier Regulator Tube Automatic Identification Device

Features:
1.The product is made of high-quality materials with guaranteed quality
2.Can test 74ch series, osmo series, cd4000 series, hef400 series, 4500 series, operational amplifiers, interface chips, optocouplers, transistor automatic recognition, voltage regulator voltage value recognition
3.It can also test and integrate over 1300 types of chip data models and over 420 types of transistor data models, covering most common general-purpose devices within 24 pins, greatly reducing maintenance workload and improving work efficiency
4.The product has a delicate and beautiful appearance, making it easy to carry
5.It is a professional device with buttons for easy and convenient operation

Description:
It is a multi-functional maintenance tester designed specifically for frontline maintenance personnel, which can choose different testing modes such as 5V mode, 3.3V mode, automatic mode, etc. It can test 74ch series, 74ls series, osmo series, CD4000 series, HEF400 series, 4500 series, operational amplifiers, interface chips, optocouplers, transistor automatic recognition, voltage regulator value recognition, and so on.
Built in over 1300 types of chip data models and over 420 types of transistor data models, covering most common devices within 24 pins, it can significantly reduce maintenance workload and improve maintenance efficiency.
The maintenance assistant has a 9V stacked battery, which, like a regular multimeter battery, consumes a very ordinary amount of power for a digital multimeter. Press the Enter key key to start the machine. The first time the machine starts, it automatically runs a self check. The self check detects that the battery voltage exceeds two seconds and displays on the screen. When the battery voltage is lower than 7v, replace the battery to ensure the measurement accuracy. If there is no alarm, measurement work can begin. The theoretical resolution of Native ad 10 ad and 5V voltage is 0.0048v. Due to the use of battery power supply, it is not suitable for measuring high-power thyristors. The Zener value must be based on actual measurement and cannot be solely based on the nominal value. The default directory for initialization is the search directory. A typical optocoupler can test up to ten parameters, and simply measuring the logic ratio of the optocoupler has little practical significance. This machine can test the secondary saturation voltage of the optocoupler for reference. Test standard 4-foot optocoupler.

Operating Instructions:
There are seven buttons on the panel, which are used for up, down, left, right, typing keys, and hotkeys o and p.
The up and down keys are used to adjust the directory and change the model, while the left and right keys are used to move the cursor left and right to select the item to be changed. The input key is used for changing machines and executing test commands. Open the battery covers on the two 5 # 1.5v batteries and close the battery covers. Press Enter for more than 2 seconds to start the machine, and the current battery voltage will be automatically displayed. When the battery level is too low, replace the battery. If the voltage is too low, it will affect the reliability of the test results and automatic shutdown protection.
Power on: press the Enter key for more than 2 seconds to power on.
Shutdown:
1 Press the Enter key key under the OFF directory to shut down the machine immediately.
2 Press to enter any directory and press the Enter key key for more than 10 seconds to hang up.
3. Automatically shut down after 60 seconds without any operation
Shortcut 1: Press the 0 key to quickly shut down the machine (Type 06)
Button 2: Press the p key to repeat the self check and reset button

Equipment Positioning Method:
1. Place the chip and optocoupler above the alignment, and align the 1-pin IC with the base.
2. The left transistor has mostly three slots.
3. Place the IC regulator on pins 13 and 14.
Note: The order of transistor display pins corresponds to 10-foot, 11-foot, and 12-foot ic blocks from left to right, respectively.
(Non built-in battery or adapter)

Package Included:
Package 1: Tester X1
Package 2: Tester X1+16PIN holder X1+20PIN holder X1+24PIN holder X1